الوصف الوظيفي:
أحدث معلومات الوظائف من V2X لمنصب KC-130J Aircraft Mechanic III- الكويت City, الكويت. If the KC-130J Aircraft Mechanic III- الكويت City, الكويت الشاغرة في الكويت City تتوافق مع مؤهلاتك، يرجى تقديم أحدث طلب أو سيرة ذاتية مباشرة من خلال بوابة وظائف Jobkos المحدثة.
يرجى ملاحظة أن التقديم على وظيفة قد لا يكون سهلاً دائماً، حيث يجب على المرشحين الجدد استيفاء مؤهلات ومتطلبات معينة تحددها الشركة. نأمل أن تكون الفرصة المهنية في V2X لمنصب KC-130J Aircraft Mechanic III- الكويت City, الكويت أدناه تتوافق مع مؤهلاتك.
Description Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
Major Job Activities
- Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.
- Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins.
- Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests.
- Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.
- Read, interpret, and apply manufacturers maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
- Use illustrated parts breakdowns (IPBs) to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.
- Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIMs), Maintenance Requirement Cards (MRCs), manufacturer's specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.
- Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.
- Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire & Wheel rebuilding.
- Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems.
- Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.
- Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/
- When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).
Material & Equipment Directly Used Must have a working knowledge of and be proficient with input and extract data of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.
Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.
Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds.
Qualifications Education / Certifications
- High School Diploma
- Aviation Gas Free Engineering (AVGFE) certification
- Hydraulic Contamination certification
- I Level & O Level Tire & Wheel certification
- I Level MLG Brake repair / rebuilding qualification
- Auxiliary Power Unit (APU) run qualification
- Applicable Support Equipment licensing
- Airframes & Powerplants (310 & 120) Collateral Duty Inspector (CDI) qualification
- Airframes & Powerplants (310 & 120) Collateral Duty Quality Assurance Representative (CDQAR) qualification
- Corrosion Prevention and Control and Aircraft Paint qualification
- Confined Space Entry certification
Experience
- Four years' maintenance experience with C-130 Airframes/Power Plants Systems preferred.
- Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.
- Must have a working knowledge of الأول aid procedures to be used in an emergency.
- Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs & procedures).
Specific Requirements
- Must be الولايات المتحدة الأمريكية (U.S.) citizen, be able to read, write, and understand the English language.
- Must be able to obtain a الولايات المتحدة الأمريكية Passport. If you currently possess a الولايات المتحدة الأمريكية Passport it must have at least 24 months of time remaining before expiration.
- Must have a valid U.S. Driver's License.
- Must be willing to follow الكويت Labor Law policies and able to adhere to and comply with all الكويتi Labor and Immigration requirements.
- Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.
- Must be willing and able to comply with all contractual Performance Work Statement (PWS) Requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG & MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.
- Must be willing and able to deploy off-site as required to support الكويت Air Force operations.
- Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.
- Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.
- Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance.
- As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O and I level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs.
- Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed.
. click apply for full job details
معلومات الوظيفة:
- الشركة: V2X
- المنصب: KC-130J Aircraft Mechanic III- الكويت City, الكويت
- مكان العمل: الكويت City
- الدولة: KW
كيفية تقديم الطلب:
بعد قراءة وفهم المعايير ومتطلبات الحد الأدنى من المؤهلات الموضحة في معلومات الوظيفة KC-130J Aircraft Mechanic III- الكويت City, الكويت at the office الكويت City أعلاه، أكمل فوراً ملفات طلب الوظيفة مثل خطاب التقديم، السيرة الذاتية، نسخة من الشهادة الجامعية، كشف الدرجات، والملاحق الأخرى كما هو موضح أعلاه. أرسلها عبر رابط الصفحة التالية أدناه.
الصفحة التالية »